New construction – UFG Umformtechnik GmbH
May 2019
Preparations are running
The new building of UFG Umformtechnik GmbH is in full swing. Here you will soon receive more information.
We will also keep you up to date with impressions of the current construction measures.
July 2019
Mowing the area
A new building of UFG Umformtechnik GmbH will soon be located here. Be curious, we will keep you up to date on the subject of new construction.
August 2019
Production of the subgrade
Now it already looks like a construction site…
Excavators and bulldozers start the production of the subgrade.
It goes forward!
August 2019
view from above
From the bird’s eye view: In the most beautiful summer weather we are working hard on our new property… and week after week we are getting closer and closer to the actual start of construction.
August 2019
rest before the storm
Time to take a deep breath…
Now the floor is ready for the next construction phase. Let’s go!
August 2019
The lime layer
For optimal stabilization, a layer of lime is milled 40 cm deep into the ground and then smoothed.
This soil-lime mixture results in a solid base for our new production hall.
September 2019
All around
Everything was thought of during the construction planning. Even the construction of the parking areas and the raising of the flagpoles are already in full swing.
October 2019
The foundation
A lot has happened in the last weeks.
We have used the beautiful weather of the summer to prepare the ground for the start of construction of the production and administration building.
For a stable foundation, reinforcing steel cages
The construction of the hall begins
With a little delay, the next construction phase now begins – the building of the hall.
In the next few days, the steel construction, consisting of 80 tons of steel,
Built up step by step and welded to the foundation anchor plates.
January 2019
The outer facade
The sandwich elements are now being installed as the external facade.
February 2020
The outer facade
The outer facade was finished with the sandwich elements and the large rolling gate is also already installed.
February 2020
suspended ceiling as additional storage space
A false ceiling was installed as additional storage space.
February 2020
The 4 new overhead cranes
Our 4 new overhead cranes for the production area were installed.
March 2020
The interior fittings
The interior work is running at full speed!
The floor is now optimally prepared for further processing.
The underfloor heating has already been laid and then the concrete core activation was installed.
May 2019
The media pit is ready!
The media pit was completed.
May 2020
dry construction in the administration section
The drywall construction in the administration section is running at full speed!
May & June 2020
Assembly of the photovoltaic system
The company maxx solar & energie from Waltershausen started the installation of the photovoltaic system this week. (May 2020)
The assembly of the photovoltaic system is now also completed. (June 2020)
–
May 2020
The cladding sheets are now complete
The cladding sheets were completely mounted on the base and the paving of the driveway was started.
–
–
June 2020
The paving work in front of the hall has now been completed.
Now the paving work in front of the hall has also been completed.
–
–
–
June 2020
A lot has happened inside too.
The partition walls were erected.
Meters of cable were laid.
And the underfloor heating in the administration part is also finished.
–
July 2020
The view from above
View of our new object from above.
July 2020
Tanks for oxygen and nitrogen
The two tanks for oxygen and nitrogen were installed and connected.
July 2020
Outdoor advertising – new building UFG-Gotha
Our outdoor advertising was placed. Now we are no longer to be overlooked.
